Bison Kit Transparent

Product Overview

  • • Crystal clear.
  • • Bonds instantly (after solvents have evaporated).
  • • Super strong, suitable for materials under stress.

Product Information

Bison Kit Transparent

 

Bison Kit Transparent

 

Bison Kit Transparent Super-strong, crystal clear, universal contact adhesive based on polyurethane rubber, resins and solvents.

Ideally suitable for bonding many transparent materials, such as plexiglas, perspex, polycarbonate. Also bonds (synthetic) leather, vinyl, soft PVC, cork, canvas, textiles and many rigid and soft synthetics including PVC, ABS and polystyrene. Very suitable for repairing items such as shoes, bags, toys, book covers, name plates and creating (hobby) handicraft work. Ideally suitable for bonding PVC pond liner. Not suitable for Polystyrene foam (Tempex®), PE, PP, PTFE and vinyl.

 

Directions For Use

 

Stir well before use. Should preferably not be diluted. Parts must be clean, dry and free of grease. Coat both substrates completely. Allow to dry for a minimum of 10-40 minutes. In case of porous materials, apply a second coat and let dry. Then join parts and roll or tap firmly (with a rubber
mallet). Stains/residue: Remove wet adhesive residue immediately with Degreaser/Thinner for Bison Kit®. Dried excess adhesive can only be removed mechanically or with a paint stripper (pre-test). Points of attention: For optimum results, both the adhesive and the parts to be bonded must be at room temperature (definitely do not use below +10 °C). The final bonding strength depends on the pressure applied. Therefore, press as firmly as possible across the entire surface. Should the adhesive joint between porous materials be exposed to long-lasting contact with water, the adhesive may detach from the wet surface.

 

Available in a 50ml tube carded. Contact us for more information or see what else is available from Bison here.