Product Overview

  • • Clear liquid primer to assist bonding of Procure cyanoacrylates
  • • Enables adhesion of difficult to bond substrates
  • • Contains zero, ozone hazardous solvents
  • • Available in 20ml, 50ml (bottles) and 1ltr (tins)

Product Information

Procure PC77 Cyanoacrylate Primer

Procure PC77 Cyanoacrylate Primer enables the adhesion of difficult to bond substrates such as low energy plastics (polypropylene, polyethylene, silicon rubber and even PTFE). PC77 works by increasing the surface energy of the substrate to which it is applied, allowing Procure cyanoacrylates to bond the surfaces.


Directions For Use


1. Brush primer onto surfaces to be bonded.

2. Wait for the solvent carrier to evaporate (normally 10-30 seconds).

3. Apply appropriate Procure cyanoacrylate to one of the surfaces and assemble parts.
If the bond is Polypropylene to polypropylene, both surfaces should be primed.


General Information


For information on safe handling of Procure PC77 Cyanoacrylate Primer consult the Safety Data Sheet (SDS).

Contact Us
close slider

    By ticking this box, I understand that I am sharing my contact details with Cyanotec in order for them to answer my query and I am also giving them consent to contact me regarding my questions.

    Our GDPR Policy can be found here. You can contact us anytime using any of the methods shown on this contact page if for any reason you would like us to remove your details from our records.