Product Overview

  • • Debonder liquid for Procure Cyanoacrylate removal
  • • Supplied in easy to apply brush cap bottles
  • • Will remove uncured and cured adhesive
  • • Available in 20ml, 50ml (bottles) and 1 litre (Tins)

Product Information

Procure PC68 Cyanoacrylate Debonder.

Procure PC68 Cyanoacrylate Debonder is used to clean areas of uncured adhesive and remove small areas of cured material. Over time will soften thick portions of the cured material. That can be applied to materials such as steel, plastic, wood, glass and rubber.

PC68 is also suitable for debonding skin but should not be used to de-bond eyelids or lips.


Directions For Use


For Bonded Material

1. Apply to glue line and leave for 30 seconds. Repeat if necessary.
2. Wipe away excess with a clean cloth.

For Bonded Skin

1. Apply to glue line and leave for 30 seconds. Repeat if necessary.
2. Wash immediately after with warm soapy water and apply moisturising cream if necessary.
Caution: Do not use to de-bond eyelids or lips. Do not use on broken or sensitive skin.


General Information


For information on safe handling of Procure PC68 Cyanoacrylate Debonder consult the Safety Data Sheet (SDS).

Contact Us
close slider

    By ticking this box, I understand that I am sharing my contact details with Cyanotec in order for them to answer my query and I am also giving them consent to contact me regarding my questions.

    Our GDPR Policy can be found here. You can contact us anytime using any of the methods shown on this contact page if for any reason you would like us to remove your details from our records.