For joining pipes, sockets and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. Extremely suitable for large diameters and at higher temperatures (> 35°C). Suitable for diameters ≤ 800 mm. Max. 16 bar (PN 16). Maximal tolerances: 0.8 mm diametrical clearance / 0.2 mm press fit. Suitable for e.g. pipe systems
Saw off pipes squarely, chamfer and deburr.
Clean adhesive surfaces with acetone and a clean, lint-free cloth.
Apply adhesive rapidly and evenly length ways to both bonding surfaces (pipe thickly, sleeve thinly).
Assemble joint immediately. Remove excess adhesive. For the first 10 minutes, do not load the joint mechanically. Properly close the container immediately after use.